The Working Principle Of Centrifugal Disc Polishing Machine

Updated:23-04-2019
Summary:

The Centrifugal Disc Polishing Machine uses a centrifug […]

The Centrifugal Disc Polishing Machine uses a centrifugal force principle to achieve high-speed polishing of the workpiece in the barrel of the grinding vessel. It uses the chain and gear to drive the rotation of the main shaft. The four hexagonal grinding containers rotate and revolve in the large circle of the main shaft, which promotes the grinding of the grinding object in the high-speed grinding state, thereby realizing the workpiece in the working container and grinding and polishing abrasive. The abrasives are subjected to high-speed turning and rubbing against each other to achieve polishing of the surface of the workpiece.

The difference between the Centrifugal Disc Polishing Machine and other polishing machines is that the Centrifugal Disc Polishing Machine has four barrels of the machine. When the machine is working, four grinding container barrels work at the same time. The workpiece and polishing materials such as abrasive polishing abrasives, polishing slurry, The cleaning agent, the polishing brightener and the like are placed in the barrel of the grinding container, and the four grinding containers are in a sealed state under the working condition, so after the high-speed rotation, the heat in the grinding barrel is relatively high, so the polishing speed thereof Relatively fast. It not only deburring the workpiece quickly but also has a good effect on the surface finish of the workpiece. It is the corrector in the grinding and polishing machine. It is ideal for the surface finish of metal workpieces. It is often used for bright polishing of workpieces because of the volumetric relationship of the grinding vessels, which are often used for surface treatment of small workpieces. Such as hardware workpieces, mechanical gadgets, etc., can also be used for surface polishing of glasses, jewelry, and other workpieces.

Although it is divided into four barrels, its operation is very convenient. On the machine's control panel, there are buttons for speed, time, etc. You can set the working time of the machine, and you can adjust its working speed at will during operation.

In order to make better use of the user, its four grinding container barrels are made of wear-resistant polyurethane material. If the inner lining is worn out due to excessive use time, it can be replaced at any time without affecting the machine. work. The Centrifugal Disc Polishing Machine is ideal for surface treatment of small workpieces in hardware.