Vibratory Finishing Machine Manufacturer Introduces What Is An Attached Concrete Flat Vibrator

Updated:02-10-2019
Summary:

Today,  Vibratory Finishing Machine  manufacturers  sha […]

Today,  Vibratory Finishing Machine  manufacturers  share the use of safe concrete flat vibrators and safety precautions:

 

1. The insulation of the motor should always be kept good. If long-distance transportation or long-term idle, the phase insulation of the coil and the insulation to the ground should be measured. The resistance should not be less than 0.5 megohms (check whether the power supply is loaded).

 

2. When installing, the screw hole position of the bottom plate should be correct to avoid skewing the bolt to prevent the body from being affected by abnormal pressure. The bolts and nuts of the bottom plate must be tightened and the tightening force balanced.

 

3. Do not use long-term operation on dry and hard land when using. In order to avoid vibration and even damage the machine, the safe use of electricity and operating procedures must be strictly observed during use. The motor should be equipped with a leakage switch and check the ground contact resistance on time.